14oz Quencher 2.0 Full Wrap Template SVG, Tumbler Laser Engraving Design Digital File, Add Your Design, Stanley Brand Full Wrap SVG Template
$4.00
This template file will allow you to create your design for a Stanley Brand 14oz Quencher tumbler. I've aligned the logo in the center so you can use Center alignment in LightBurn. To confirm your design is placed correctly, you can send ONLY the logo box to your laser and frame that - after that, set design to output and alignment should be on.
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This template file will allow you to create your design for a Stanley Brand 14oz Quencher tumbler. I've aligned the logo in the center so you can use Center alignment in LightBurn. To confirm your design is placed correctly, you can send ONLY the logo box to your laser and frame that - after that, set design to output and alignment should be on.
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This template file will allow you to create your design for a Stanley Brand 14oz Quencher tumbler. I've aligned the logo in the center so you can use Center alignment in LightBurn. To confirm your design is placed correctly, you can send ONLY the logo box to your laser and frame that - after that, set design to output and alignment should be on.
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This listing is for a Digital Download - NOT a physical item and no design is included.
The sample tumbler design was laid out using the template.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please contact me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **