40oz Trek Full Wrap Template SVG, Tumbler Laser Engraving Design Digital File, Add Your Design, Simple Modern Brand Full Wrap SVG Template
$6.00
This template file will allow you to create your full wrap design for a Simple Modern Trek 40oz tumbler or place two graphics centered above the logo and symmetrical on each side with ease.
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This template file will allow you to create your full wrap design for a Simple Modern Trek 40oz tumbler or place two graphics centered above the logo and symmetrical on each side with ease.
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
This template file will allow you to create your full wrap design for a Simple Modern Trek 40oz tumbler or place two graphics centered above the logo and symmetrical on each side with ease.
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **
I've set it with the origin from the center of the handle tabs with notes on sizing.
The Simple Modern tumbler can be a little tricky with the logo on the smaller part of your design vs. the top, where you are likely setting the size of your cup. I've sized the template to account for this discrepancy.
This listing is for a Digital Download - NOT a physical item.
This file has been used to create many Tumbler designs and tested in Lightburn and Adobe Illustrator. You may need to resize slightly for your specific rotary/laser combination. I've included a link to a YouTube video where I walk through setting up designs using templates in the PDF guide.
I'm creating many more templates for tumblers, so check my shop for other brands and sizes.
You will receive an SVG file ready to go and PDF instructions.
NO PHYSICAL PRODUCT WILL BE SENT
*********************************************************************************************************************************************
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed, or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. Please get in touch with me if you run into any problems (or need additional file types).
** By purchasing this item, you are confirming that you have read, understood, and agree with the above Terms and Conditions **