Lightsaber Stand SVG, Single Saber SVG Laser Cut File, Glowforge Ready, 1/8" and 1/4" Tested Designs , Savi's Workshop Lightsaber Ready
$5.99
This Lightsaber Stand SVG is Glowforge Laser Tested, ready for you to build a stand for your Savi's Workshop Saber. These Laser cut files included are for 1/8" material or 1/4" material with KERF adjusted for each size. I tested with both wood and acrylic.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
This Lightsaber Stand SVG is Glowforge Laser Tested, ready for you to build a stand for your Savi's Workshop Saber. These Laser cut files included are for 1/8" material or 1/4" material with KERF adjusted for each size. I tested with both wood and acrylic.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
This Lightsaber Stand SVG is Glowforge Laser Tested, ready for you to build a stand for your Savi's Workshop Saber. These Laser cut files included are for 1/8" material or 1/4" material with KERF adjusted for each size. I tested with both wood and acrylic.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
No need to glue the stands as they are designed to be assembled and disassembled with ease.
No physical product will be sent - digital files only.
If you want to add engravings in the same fonts as in the sample, you will need the StarJedi font from Boba Fonts on Dafont. com, and the Angie Sans font from Adobe fonts.
-------------------------------------------------------------
This listing is for a set of SVG files (digital downloads) prepared for your laser cutter, and has been Glowforge tested.
NO PHYSICAL PRODUCT WILL BE SENT
Terms of Use
TERMS AND CONDITIONS OF PURCHASE
COMMERCIAL LICENSE. This allows an UNLIMITED amount of completed projects to be sold.
You are permitted to sell any cuts that you make from these templates. Commercial licensing is intended for small businesses ONLY.
Under no circumstances should the design be altered (other than re-sizing and personalization), resold, distributed or shared in any way. The files remain the property of Things Katie Makes
Due to the nature of digital products, refunds cannot be given. If you run into any problems (or need additional file types) please contact me.
** By purchasing this item, you are confirming that you have read, understood and agree with the above Terms and Conditions **
I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.